Foam and Foam Guns

Foam and Foam Gun Cleaner

Foam2Foam A multi-purpose, professional, low-expansion construction and gap and crack filler. Great for ICF, SIP and EIFS applications. One component polyurethane foam. Cures by absorbing water vapor from the air. (32 oz can/Case of 12)

Used for filling, sealing, and insulating joints and cracks
Professional quality
Accurately controlled application
Moisture-curing
Acoustical sealant
Drywall Adhesive; reduces fasteners by 60%
Excellent adhesion to most surfaces
Temperature, water and chemical resistant
No CFC/HCFC
Not UV-resistant
Compatible with EPS foam boards
UL Approved Class 1-NER 645 Fire Block
Paintable and can be plastered over

Enerfoam A minimal expansion foam with an operating temperature range from 25-120 degrees F. Initial skin time is 6 minutes and can be trimmed in one hour. Acoustical sealant - STC of 69. Meets ASTM C557-93, CGSB 71.25, and CA25. (32 oz can/Case of 12)

All-Season Foam Specially formulated to cure in a wide range of temperatures. (24 oz can/Case of 12)

Operating temperature range 20^o to 120^oF
Cures fast to concrete and EPS foam
Thermal resistance R-value 4.5 per inch
ASTM E-84 - Flame spread 5 & smoke development 10

Desert Formula Foam Specially formulated to use in high temperature, low-humidity climates. (24 oz can/Case of 12)

Operating temperature up to 120^oF and low humidiy conditions
Cures fast to concrete and EPS foam
Thermal resistance R-value 4.5 per inch
ASTM E-84 - Flame spread 5 & smoke development 10

Black Foam Specially formulated and ideally suited to blend into water gardens and other landscape applications. (24 oz can/Case of 12)

Operating temperature up to 120^oF and low humidiy conditions
Cures fast to masonry and garden stones
Creates moisture vapior barrier
Increases efficiency of HVAC systems
Thermal resistance R-value 4.5 per inch
ASTM E-84 - Flame spread 5 & smoke development 10

EnerBond Drywall Adhesive One can replaces up to 40 quart tubes of traditional adhesive (32 oz can/Case of 12)

Foam2Foam Gun Cleaner For cleaning your foam gun. Usually you need to clean the gun every 10-12 cans of foam. (12 oz can)

Please contact us for more information or for pricing.

Products Reward Walls ICFs Waterproofing Foam Guns Simpson Strong Ties Hot Knives